Buick ManageUPS Manuale Utente Scaricare il pdf (Pagina 31)

File Transfers

28 ManageUPSNET User Instruction Manual

Uploading Files

Some of the ﬁles listed in Appendix C, page 45,

can be uploaded to the ManageUPS

NET using

several different methods. This section

describes the four methods which can be used to

perform ﬁle uploads.

Upload Conﬁguration File Using BOOTP

and TFTP

This is described in section 5.2.1 Using BOOTP

& TFTP.

Upload File Using FTP

1. Ensure that the adapter is attached to the

network and has already been conﬁgured

with an IP address, Subnet Mask and a

Default Gateway. The FTP server must also

be enabled.

2. Open a Command Prompt.

3. Change to the directory containing the

ﬁle(s) to upload.

4. Open an FTP session by typing “ftp” at the

command line.

5. Connect to the ManageUPS

NET by typing

“open xxx.xxx.xxx.xxx yy” where

“xxx.xxx.xxx.xxx” represents the IP

address of the ManageUPS

NET and “yy”

represents the FTP server port. If the port

was not changed from the default of 21 then

supplying the port in the command line is

optional.

6. The ManageUPS

NET will ask you for a user

name and password. The default user name

is “admin” the default password is

“admin.” Yours may be different.

7. Type the command “ftp> bin” and the

press [ENTER]. The ManageUPS

NET should

respond with “ftp> 200 Command

okay.”

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

Commenti su questo manuale

Nessun commento